|
Poseidon 3468, Hw-Group, Raumüberwachung und Monitoring, High End Überwachung. 4 Ports für Sensoren oder Kombi- Sensoren, 4 potentialfreie Eingänge, 2 Relais- Ausgänge (auch per Web schaltbar). Webinterface, voll SNMP fähig, Email.
Poseidon is an IP thermostat with 2 relay outputs, 4 dry contact inputs, and support for 4 sensors. Includes a built-in web server, output control and alarm alerts (e-mail and SNMP trap). Two relay outputs rated up to 110/230V can be controlled manually over a web interface.
Poseidon 3468 alerts the operator to critical situations (contact opened/closed, or temperature/humidity out of safe range).
In case of an alarm, Poseidon sends an e-mail and connects to your NMS (Network Management System) with a SNMP trap.
Configuration and current sensor readings are accessible through a graphical WWW interface.
* IP thermostat function to control outputs locally
* 2 outputs rated at 250V (double-throw relay contacts)
* Connect up to 4 temperature or humidity sensors and 4 Dry Contact inputs
* When a contact is closed, e-mails or SNMP traps are sent to multiple recipients
|
Intelligent sensors are connected to the 1Wire (RJ11) bus.
- Total bus length up to 10/30 m.
- Each sensor watches its own readings (SafeRange). When the range is exceeded (alarm condition), e-mail or SNMP trap is invoked.
- Temperature - Temp-1Wire
- Humidity - Humid-1Wire
Sensors with contacts:
- 2 relay outputs
- 4 Dry Contact inputs
- Flood detector
- Gas leak detector
- Smoke detector
- Motion detector
|
|
IP thermostat = output control
Each relay output can be controlled either by a local condition, or manually:
- Over WWW by the user
- M2M XML protocol
- M2M SNMP protocol
- M2M Modbus/TCP protocol
The local condition mode works as a thermostat or hygrostat over IP. The output can be tied to any connected sensor, including dry contact inputs. The control is affected by sensor hysteresis.
|
Die Poseidon Serie von HW group lässt sich von jedem, auch von unbedarften Benutzern, innerhalb kürzester Zeit und wenigen Minuten aufsetzen. Nachdem die Sensoren angesteckt sind einfach die IP Adresse des Gerätes im Browser öffnen und einloggen. Wie das geht ist ausführlich beschrieben und innerhalb weniger Handgriffe erledigt.
|
 |
-
No special SW needed
-
Installation in 10 minutes
-
Built-in graphical WWW interface for configuring the unit and displaying the reading
-
Outputs controlled over IP or locally (thermostat mode). Outputs can be controlled based on a selected sensor (input) value being less than/greater than specified.
-
Alarm alerts:
- Email
- SNMP Trap
- SMS via the PD Trigger application
-
Pop-up window with the alert, using the supplied SW application
-
With the supplied HWg SDK, you can control Poseidon from your own applications in 2 hours after opening the box
-
Applications in IT:
- Poseidon is supported by more than 60 NMS systems (LoriotPro, Nagios, SNMPc, HP OpenView, IBM Tivoli, MRTG, Intellipool, and more)
- SDK (Software Development Kit): libraries, examples (ActiveX, VB, Delphi, C, C#, .NET)
- Industrial applications:
- Works with most SCADA systems (OPC server and I/O server via Modbus/TCP)
- “Soft-PLC” Windows application for remote access to the units, measuring and control
- Windows application for data collection in the food industry, IT systems for pharmacies
|
|
