HWg ist einer der führenden Hersteller von Raumüberachungssystemen für Temperatur-, Luftfeuchte-, Sensor-Relais-, Luftdruck-, Rauch-, Magnetkontakt-, potentialfreie Kontakt- Sensoren und Ralais over IP Lösungen.
High End Überwachung. 5 Ports für Sensoren oder Kombi- Sensoren. Webinterface, voll SNMP fähig, Email. SMS über Modem.
Poseidon model 3265 is simple and autonomous device which can send an Email when temperature or humidity exceeds defined range. As well as Email, the device can directly send SMS over GSM modem. Values and configuration are available from WWW graphic interface, sensor's values over several network protocols (SNMP, XML, Modbus/TCP and others).
The Poseidon model 3265 notifies the service of crisis situation (temperature or humidity out of safe range) in several methods. It sends Email or SMS directly to your mobile phone and it connects to your NMS (Network Management Software) over SNMP.
Poseidon 3265 supports up to 5 connected sensors for temperature and humidity monitoring. Each sensor monitors safe range. In case the value exceeds the range (Alarm status) the device notifies service via SNMP trap or Email, or IT administrator via SMS.
The sensors are connected over total wiring length of 10 meters, standard phone cables and RJ11 or RJ12 are suitable
SMS notification of Alarm (temperature or humidity out of safe range) reaches recipient over GSM network even in case of internet failure.
Basic features
Does not need any specialized SW.
Configuration and actual values accessible over simple graphic interface (web browser)
It can be connected to every building monitoring system, industry and IT networks
Support and plug-in modules for many NMS applications (LoriotPro, HP OpenView, Nagios, IBM Tivoli, SNMPc, MRTG and others).
Notification of Alarm status via Email or over SMTP, SNMP Trap or SMS (external GSM modem).
Open communication protocols (SNMP, XML, Modbus/TCP and others)
Every sensors has unique ID
Safety protected with password, IP address range, HW protection against configuration changes
Temperature and humidity sensors in different construction and cable lengths (1 / 3 / 10 meters).
Several support programs and utilities (Pos-Excel, PD Trigger and others)
We supply programs for food industry (CapTemp), IT monitoring (M1) and others
For OEM partners offer to change device name, web page design, list of contacts and others for order of 50 pieces and more
SDK (Software Development Kit) development library + examples (VB, Delphi, C, C#)
FirmWare update over WWW or RS-232.
Die Poseidon Serie von HW group lässt sich von jedem, auch von unbedarften Benutzern, innerhalb kürzester Zeit und wenigen Minuten aufsetzen. Nachdem die Sensoren angesteckt sind einfach die IP Adresse des Gerätes im Browser öffnen und einloggen. Wie das geht ist ausführlich beschrieben und innerhalb weniger Handgriffe erledigt.
Das Einrichten der Sensoren wird hier gezeigt:
Beschreibung Details:
WEB (HTML)
Values and state of sensors are presented on WWW page. The page is automatically reloaded every 5 second. There is a link to Flash Setup from main HTML page, update FirmWare and others
XML
All sensor's values as well as alarm status information are available from XML files (temper.xml) and any application can log it from XML tags
SNMP
SNMP is protocol for monitoring of telecommunication devices, network infrastructure and related technology. The Poseidon is fully controllable over SNMP (v1, partially v2
Modbus/TCP
Modbus/TCP is industrial standard for input from sensors and output to visualizing and SCADA systems. All values are available over Modbus/TCP
Alarms
SNMP Traps
Exceeding value out of "Safe Range", the sensor gets to Alarm status. To notify of this status the device sends SNMP Trap including alarm description to configured IP address
Email
Exceeding value out of "Safe Range", the sensor gets to Alarm status. To notify of this status the device sends Email including alarm description
SMS
Exceeding value out of "Safe Range", the sensor gets to Alarm status. If the GSM modem is connected and configured, SMS including sort description is sent to setup phone number.
HW interface
RS-232
Interface for configuration and GSM modem connecting
IT Bus (1-Wire)
Inexpensive interface to connect up to 10 temperature sensors over a total distance of maximum 10 meters
Technical specifications
Port 1: Ethernet RJ 45 - 10BASE-T / 10 Mbit/s
Port 2: SENSORS - 1-Wire bus (RJ12)
Port 3: RS-232 serial port for Serial setup or to connect GSM modem
Power supply: 12V DC
Device setup:
Locally - RS-232 Setup
UDP Setup
Over WEB - graphic interface Flash setup
Over SNMP
Port 1 - Ethernet port
+ Interface
RJ45 (10BASE-T) – 10 Mbit or 10/100 Mbit network compatible
+ Supported protocols
IP: ARP, TCP/IP (HTTP, Modbus over TCP), UDP/IP (SNMP)
+ SNMP compatibility
Ver:1.00 compatible, some parts of the ver 2.0 implemented
Port 2 - 1-Wire sensor bus
+ Connector
RJ12 (6 pins - 4 pins used only)
+ Sensors / distance
model 3265 - max. 5 sensors, up to 10 m total
model 3262 - max. 2 sensors, up to 10 m total
Port 3 - RS-232
+ Connector
Cannon 9 male (DB9M)
+ Pinout
Standard IBM PC (RxD,TxD,RTS,CTS, GND)
+ Usage
Serial setup,
GSM modem connection (model 3265 only)
+ Max distance
Up to 15 m
LED Status indicators
+ POWER
Green - power OK
+ LINK & Activity
Yellow- Ethernet connectivity
DIP SWITCH configuration
+ DIP1 - RS--232 Setup mode
ON = RS-232 Setup mode
OFF = Run mode
+ DIP2 - Security
ON = Security mode - remote configuration disabled
OFF = Non-Security mode - remote configuration enabled
Physical parameters
+ Voltage requirements
9 - 15V / 250 mA DC
coaxial power connector (barrel), GND on the shield
+ Dimensions
35 x 101.6 x 76.2 [mm] (H x W x D )
+ Weight
150 g
Functional parameters
Device SETUP configuration possibilities
- RS-232 Setup - over any RS-232 terminal 9600 8N1
- UDP Setup - IP address assign via UDP with using PN Eye
- TCP Setup - Terminal configuration and sensors management
- WWW Setup - HTTP Flash application
- SNMP (just for some parameters)
Ihre HW group Fachberater
Herzlichen Dank für Ihren Besuch.
Markus Huber
Lösungsberater &
technischer Vertrieb
mhu@bellequip.de
Tel: +49 (0) 8081 95 26 9-16
freecall: 0800 800 999 016
aus dem Festnetz d. dt.Telekom
Notification of Alarm status via Email or over SMTP, SNMP Trap or SMS (external GSM modem). 
For OEM partners offer to change device name, web page design, list of contacts and others for order of 50 pieces and more
