HWg ist einer der führenden Hersteller von Raumüberachungssystemen für Temperatur-, Luftfeuchte-, Sensor-Relais-, Luftdruck-, Rauch-, Magnetkontakt-, potentialfreie Kontakt- Sensoren und Ralais over IP Lösungen.
Damocles model MINI is the unit of digital inputs and outputs controlled over web. Apart from Emailu and graphic WWW interface, some network protocols (SNMP, XML, Modbus/TCP and others..) are supported.
Damocles model MINI unit accesses 4 digital inputs and 2 relay outputs over Ethernet. If the state on the digital inputs is changed, the unit can send E-mail, SNMP Trap, switch one of the outputs on or send SMS using supplied software.
The inputs values and relay control are accesible for the user from any web browser or using network protocols.
Damocles model MINI owing to easy installation and control is designed for large spectrum of clients who need remote monitoring and control of digital inputs and outputs.
* 4 digital inputs for contact connecting
* 2 relay outputs relay contacts (NC and NO)
* Sensor value out of range: sending Email or SNMP Trap to several recipients.
Open communications protocols (SNMP, XML, Modbus/TCP and others..)
Alarm alert
E-mail (SMTP)
SNMP Trap
SMS in GSM network (over supplied software)
Security
Access passwords
Range of IP addresses
HW protection: you can prohibit configuration change by setting the mechanical switch on the device
You can update device FirmWare over WWW and download last version from our WWW pages
Free SDK (Software Development Kit) library with examples (Visual Basic, Delphi, C++, .NET ...)
Topologie
WEB (HTML)
The state of digital inputs and outputs is displayed on WWW page. The page is automatically reloaded every 5 seconds. On the main HTML page there are links to Flash Setup, update FirmWare and others..
XML
All values, the information about alarm state including, are accessible in .XML file (values.xml) and any application can easily log it from XML tags
SNMP
SNMP is protocol for management of telecommunication devices, network infrastructure and related technologies. Damocles is fully controlled over SNMP
Modbus/TCP
Modbus/TCP is industry standard for input of sensor values and sensors into visualization and SCADA systems. All sensors values are accessible over Modbus/TCP
Alarms
o SNMP Traps
In a case of Alarm, the device will send you SNMP Trap with a description of Alarm state to defined IP address
o Email
Apart from SNMP Trap, in a case of alarm the device can send you Email with a description of Alarm state
HW interface
4x Digital inputs (Dry Contact)
Damocles model MINI has 4 digital inputs for contacts connecting (door contacts, PIR sensors, motion detectors, stop sensors, etc.)
2x relay outputs
Damocles model MINI supports 2 digital outputs like relay contacts. For each output, 1x NC and 1x NO.
Technische Spezifikationen des Damocles MINI
Ethernet: RJ 45 (10BASE-T - IEEE802.3)
4x Digital inputs: prepared for direct contacts connecting
2x Relay outputs: relay contacts NC and NO
Device configuration: * UDP Config - IP address configuration, etc.. - remotely functions over the network, but only on the local segment of the network,
Over HTTP - graphic Flash interface - ensured by access password and defined range of IP addresses.
Ethernet port
+ Interface
RJ45 (10BASE-T) – 10 Mbit or 10/100 Mbit network compatible
+ Supported protocols
IP: ARP, TCP/IP (HTTP, Modbus over TCP), UDP/IP (SNMP)
+ SNMP compatibility
Ver:1.00 compatible, some parts of the ver 2.0 implemented
Digital inputs
+ 4x Contact inputs (Dry contact)
contact directly (dry contact).
Digital outputs
+ 2x Relay contacts
up to 5A/110V AC or 5A/24V DC
1x NC and 1x NO for every output
LED Status indicators
+ POWER
Green - power OK
+ LINK & Activity
Green - Ethernet connectivity
DIP SWITCH configuration
+ DIP1
Not used
+ DIP2 - Security
ON = Security mode - remote configuration disabled
OFF = Non-Security mode - remote configuration enabled
Physical parameters
+ Voltage requirements
12-24 V/ 600 mA DC- coaxial power connector (barrel), GND on the shield
+ Dimensions
35 x 101.6 x 76.2 [mm] (H x W x D )
+ Weight
500 g
Functional parameters
Device SETUP configuration possibilities
- UDP Config - IP address assign via UDP
- TCP Setup - Terminal configuration and sensors management
- WWW Setup - HTTP Flash application
- SNMP (just for some parameters)
Ihre HW group Fachberater
Herzlichen Dank für Ihren Besuch.
Markus Huber
Lösungsberater &
technischer Vertrieb
mhu@bellequip.de
Tel: +49 (0) 8081 95 26 9-16
freecall: 0800 800 999 016
aus dem Festnetz d. dt.Telekom
