Damocles 2404, Hw-Group, Raumüberwachung und Monitoring, 24 potentialfreie Eingänge, 4 Relaisausgänge. Webinterface, XML, Email, SNMP, Modbus/TCP.

Damocles model 2404 is the unit of the digital inputs and outputs controlled over web. Apart from email, www graphical interface, also networks protocols are supported (SNMP, XML, Modbus/TCP and others..).
Damocles model 2404 unit accesses 24 digital inputs (galvanic isolated) and 4 relay outputs over Ethernet network. This model supports the connection of temperature sensor over RS-232 interface.

The input and output values and the relay control are accessible from any internet browser or by network protocols.

Damocles is intended for the use in industry, this version supposes mounting on the DIN rail, the unit can be situated in 19“ RACK or in the telecommunication environment.

* 24 Digital inputs : All galvanic isolated
* 4 Relay outputs: NO and NC contacts available
* Temperature sensor input: Can be connected over RS-232
* Sensor value out of range: sending Email or SNMP Trap to several recipients.

WEB (HTML)
State of digital inputs and outputs is displayed on WWW page. The page is automatically reloaded each 5 seconds. On the main page, there are links of Flash Setup, update FirmWare and others.

XML
All values, the informations about the alarm states including, are accessible in .XML file (values.xml) and for any application it´s easy read them from XML tags

SNMP
SNMP is protocol for administration of telecommunication devices, network infrastructure and related technologies. Damocles is fully controlled over SNMP

Modbus/TCP
Modbus/TCP is industry standard for input of values from the sensors into visualization and SCADA systems. All sensors values are accessible over Modbus/TCP

Alarms
o SNMP Traps
In the case of alarm situation, it sends SNMP Trap with the description of alarm state at defined IP address
o Email
Apart SNMP Trap, it´s possible, in the case of alarm situation, send email at the defined email address with the description of alarm state

HW interface
24x Digital inputs (Dry Contact)
Damocles 2404 has 24 digital inputs (galvanic isolated) for the connection of voltage (5-20V) or contacts (door contacts, PIR sensors, motion detectors, stop sensors etc.)

4x relay outputs
Damocles 2404 supports 4 digital outputs like relay contacts. For each output 1x NC and 1x NO.

RS-232
Damocles 2404 makes possible the software connection of one temperature sensor over RS-232 interface.
Temp-232 (-10 up to +80 °C distance: up to 20 meters)

• Ethernet: RJ 45 (10BASE-T - IEEE802.3)
• Port 1: RS-232 (connector Cannon 9 Male), possibility of connection of temperature sensor
• 24x Digital input: prepared for directly connection of contacts
• 4x Relay output: relay contacts NC and NO
• Device setting:
• Locally - RS-232 Setup - IP address setting etc..
• UDP Config - IP address setting etc.. - operates remotely over the network, but only on the local segment of the network,
• Over HTTP - graphical interface Flash - ensured by password and defined range of IP addresses.